Changing of LED Light Frequently Asked Question – If you have any issues or doubts, these Frequently Asked Questions may provide the right answer. If you need more information or your query is not answered, contact a reliable lighting shop or the customer service team.
The process is very simple and easy. Modern LED ceiling light mount designs make use of a pair of small clamps that hold on to the ceiling. These arm-looking clamps have springs that force them to push down on the interior of the ceiling.
Pull down on the old fixture and it will begin to come off. It may appear that the fixture is tightly attached to the ceiling, but it will come off with no effort. Then, hold the clamps up so it does not snap down on your fingers.
The final step is to disconnect the old fixture from the power source and inverse the process for the new fixture—connect to the power source, push the clamps up, push the fixture into place.
The process will be different for the type of LED light you install. There are spotlights, reflectors, strips, tubes, and more. Each one has a different mounting method, but most of them are simple and well explained in the user manual.
You only need to pull on it, hold the clamps up as they come out, and disconnect the fixture from the power source. Depending on how old your light is, you may need to disconnect it from a transformer.
This process is a little bit more complicated because you will need to unscrew wires from their terminals. Modern LED lights plug into a power supply for easier replacement.
It depends on how accessible the light fitting is and your knowledge about your house’s electrical installation. If you have all the necessary tools and you feel confident about your skills with electricity, you can do it on your own.
Keep in mind that you risk ending up with a botched job that will need professional attention. Worst case scenario, you may create a fire hazard if you do a poor job.
Having a qualified electrician will certainly make the whole process smoother. Besides, if you hire a professional you will be certain that the job will be done well. In case it is not, you can complain and get compensated with the person or company you hired.
No matter which way you go, always make sure the electricity has been turned off at the fuse box before anyone starts to work.
Yes and no. Some light fittings are very straight forward to change by following the user manual in the box. Some others need additional wiring and preparations before installing.
If you are planning to install some bigger fixtures—chandeliers or hanging lamps—you may need to add supports or accessories.
For a qualified electrician, changing a light fitting should be a very straight forward operation. For a person doing it alone, it may take a lot of time to figure out the wiring and get everything in place.
Changing of LED Light Frequently Asked Question – Replacing a light switch is a simple project. In general, there are four common types of switches—one pole, three-way, four-way, and dimmers. Their function is the same, to turn on and off a light.
They have terminals with screws where live wires connect and metal plates that close or break the circuit to turn a light on or off.
You can perform this operation on your own, it is very straight forward. When in doubt, consult with a qualified electrician to avoid future issues. Keep in mind that electricity is dangerous and demands high safety measures.